| Material: | |
|---|---|
| Color: | |
| Size: | |
| Quality: | |
| Availability: | |
CRF150R oil filter
Huage
Name | CRF150R oil filter | Place of origin | Fujian.China |
Model | CRF150R oil filter | Quality | High Quality |
Material | Paper | Features | Paper pleats, steel caps, rubber ring |
Color | As picture | MOQ | 50PCS |
Size | Standard size | OEM | Acceptable |
The CRF150R paper oil filter, pleated paper formed into a ring with steel caps pressed on both ends and a rubber seal in the centre. Oil seeps through the pleats from the outside and leaves through the centre, and the dirt stays behind. Direction is the critical part of fitting: with the rubber ring seated against the gallery opening the oil has to pass through the paper, while a ring hanging in the air or an element in backwards lets the oil through the gap, so the paper is there and nothing is filtered. A black face is mostly oil staining, judged by collapsed pleats, metal in the valleys and a flattened ring. The number is 15412-MEN-671, with the CRF150R and CRF150RB on the list and the CRF250R, CRF250X, CRF450R and TRX450R often on the same cross reference, so match the old element by diameter, height and centre ring bore before ordering.


FAQ
Q1: When should this oil filter be replaced?
Change it with the oil at the service interval, which is the simplest habit. Outside that, oil that has gone black and thin, an element that comes out with the pleats matted together, metal or sludge packed into the valleys, or a rubber ring gone hard and flat all mean it does not go back in.
Q2: Which bikes does it fit, and does the CRF150F take it?
15412-MEN-671 is the number, with the CRF150R and CRF150RB on the list, and the CRF250R, CRF250X, CRF450R and TRX450R are often grouped on the same cross reference table. Some listings also write CRF150F, but that is not separately confirmed here, so check your old element first. Fitment is not guaranteed, so match diameter, height and the bore of the centre ring.
Q3: What happens if it goes in the wrong way round?
The rubber ring has to seat against the oil gallery opening, which is what forces the oil through the paper. If the ring hangs in the air or the element is reversed, the oil passes the gap and the engine runs with unfiltered oil while the element looks correctly installed.