| Material: | |
|---|---|
| Color: | |
| Size: | |
| Quality: | |
| Availability: | |
XR250R carburetor repair kit
Huage
Name | XR250R carburetor repair kit | Place of origin | Fujian.China |
Model | XR250R carburetor repair kit | Quality | High Quality |
Material | Rubber | Features | Diaphragm, spring, seal ring |
Color | As picture | MOQ | 50PCS |
Size | Standard size | OEM | Acceptable |
The XR250R air cut off valve diaphragm set, three parts: the rubber diaphragm with a brass pin, the tapered spring and the small seal ring, fitted in the small housing on the side of the carburetor and trimming the mixture as the throttle shuts. A diaphragm soaked stiff by petrol, a split around the edge or a brass pin that has worked loose shows up as a run of soft pops from the exhaust on decel, a wandering idle, revs that hang a beat when the throttle closes, and heavier fuel use. Take the side cover off to fit it, pin facing in, the seal ring into its groove, the spring over the pin, the screws drawn down evenly corner to corner, and no pinching of the diaphragm. The 16048-KB7-901 is the shared number, with the XR250R, XL250R, XR350R, XR600R, CB1000C, CB1100, FT500 and GL650 on the same list, one set per carburetor.

FAQ
Q1: What is this kit?
The air cut off valve diaphragm set for the carburetor, three parts: a rubber diaphragm with a brass pin, a tapered spring and a small seal ring. It fits the small housing on the side of the carburetor body and works the fuel trim circuit for a closed throttle, not the pump diaphragm.
Q2: Which bikes does it fit, and how many do I need?
The XR250R is on the list, along with the XL250R, XL500R, XR350R, XR600R, CB1000C, CB1100, FT500 and GL650, under the number 16048-KB7-901. It is a single set, so count the carburetors on your machine and order one for each. Fitment is not guaranteed, so compare the old diaphragm, the pin and the seal ring with the new parts before fitting.
Q3: Will this stop the popping on deceleration?
A failed air cut off valve is one of the usual causes of a run of soft pops from the exhaust when you shut off, so this kit is the part to check. Rule out a split intake boot and loose exhaust joints first, since both let air in and both cost nothing to inspect. If the old diaphragm is stiff, split around the edge or has a loose pin, replace it.