| Material: | |
|---|---|
| Color: | |
| Size: | |
| Quality: | |
| Availability: | |
E6TC spark plug
Huage
Name | E6TC spark plug | Place of origin | Fujian.China |
Model | E6TC spark plug | Quality | High Quality |
Material | Ceramic | Features | M14x1.25, short reach, terminal nut |
Color | As picture | MOQ | 50PCS |
Size | Standard size | OEM | Acceptable |
The E6TC spark plug is the short thread, M14 by 1.25, threaded length 12.7 millimetres, the short reach part for two strokes. The short thread is built for the two stroke barrel, the tip works in the chamber and does not meet the piston, and it seals properly. It suits two stroke scooters, motorcycles and go karts from 50 to 125, take the old plug out and compare the thread, the threaded length, the hex and the gap, and when they match it can be used. The BP6HS, IWF20 and L66Y are cross references of the same spec, and the E5TC is the same shape with one step different in heat range, do not swap it, check the old part. A pre chamber old plug is not replaced by the plain one. The terminal nut comes with the part, fit it on the terminal and tighten, and when fitting the plug, wipe the thread clean and do not over tighten.



FAQ
Q1: What kind of plug is this?
A short reach spark plug for two stroke engines, M14 by 1.25 thread at 12.7 threaded length, with the terminal nut included. The short thread is built for the two stroke barrel, so the tip works in the chamber without meeting the piston.
Q2: Which machines does it fit?
Two stroke scooters, motorcycles and go karts from 50 to 125. The BP6HS, IWF20 and L66Y are cross references of the same spec, and the E5TC is the same shape with a different heat range. Fitment is not guaranteed, so take the old plug out and check the thread, the threaded length and the gap one by one.
Q3: Can it replace a pre chamber plug?
No, not on its own. If the old part is a pre chamber, with the little cup on the ground electrode, that is a different design, and the plain plug is not a like for like swap. Match the shape of the ground electrode against the old part before ordering.