Views: 0 Author: Site Editor Publish Time: 2026-11-17 Origin: Site
The square hole in the blue frame is not decoration, it is where your fingers go to pull the element out.
The 795115 set is a dry paper element: a blue plastic frame, white pleated paper set inside it, and a separate green mesh pre filter. The two layers split the work cleanly, the green mesh stops grass and the coarse grit, the paper stops the fine dust. To take the element out, hook a finger in the square hole and lift, do not grab the pleats, press them and they collapse, and a collapsed patch stops filtering.
Why is the paper never washed? The pleats hold a large surface area and the gaps between the fibres trap the dust. Soak it in water and the fibres swell and then shrink, the pores open up, and it looks clean while the filtering has dropped away. Let it dry in the sun and the paper goes brittle and splits in the valleys. The right clean up is to tap the frame to shake the loose dust out, or blow low pressure air through from the inside, keeping the nozzle off the paper.
Can the green mesh be washed? Yes. It is the pre filter, it does the rough work, wash it, dry it and put it back. When the paper has gone grey, when fine dust is packed into the valleys, when you cannot see light through it, or when the frame is distorted and will not sit flat, stop cleaning it and replace it.
Which number is it? 795115 is the current number, and the older 697153, 698083, 697634 and 697014 have all folded into it, so any machine carrying one of those numbers may well take this element. Before ordering, pull the old element out and match the length, the width, the shape of the frame and the depth of the hole.
Two things to watch on fitting. The frame has to sit flat and fully home, with the cover screws drawn down evenly, corner to corner. And no dust or grass must be trapped on the sealing face around the frame, anything caught there is a leak, and a leak is worse for the engine than no filter at all, because the dirt goes straight in past the edge.