NEWS

The 95-526-9-8 carburetor metering diaphragm, a black rubber diaphragm with a rectangular flange and alignment notch, six screw holes, and a center metal plate with five round holes and a central pin, used in the metering diaphragm pump to draw fuel and meter the flow. In the same family as and interchangeable with the 95-526, 95-526-8 and 95-526-9. Covers why one diaphragm carries so many numbers, its role, and how to replace it.

The 270026 carburetor diaphragm, a black rubber sheet with a long opening, fitted with a metal spring and a thin metal ring, the three making up the heart of the fuel pump, used in the pump carburetor of small horizontal shaft engines to draw fuel. Covers what the diaphragm does, why it is a three piece set, and how to replace it.

The A015006 carburetor metering diaphragm, a black rubber diaphragm with a square flange, and a center metal plate with a ring of holes and a central pillar, used in the diaphragm fuel pump to draw fuel and meter the flow. Covers what the diaphragm does, why it is a wear item, and how to fit and replace it with the right way up.

The A015058 is a replacement diaphragm for two stroke carburetors, a black rubber sheet with a central metal disc. This article covers a rough idle, a dull throttle, oil weeping, and how to check and fit the part.