TU26 Fuel Filter Assembly: The "Fuel Cleaning Hub" of Small Power Equipment

The TU26 Fuel Filter Assembly is the "fuel cleaning hub" of TU26 small engines, designed specifically for the pain point of high fuel impurities in outdoor operations. Its hose body is made of EPDM rubber, with a swelling rate of less than 2% against gasoline and diesel, so the pipe wall won’t harden or crack after long-term fuel contact, adapting to a temperature difference environment of -40℃ to 120℃.

The filter core uses high-density fiber felt with a pore density of 140g/m², which can intercept 95% of 5μm-level dust, rust and other impurities, preventing impurities from entering the carburetor and clogging the nozzle; the connector is integrally injection-molded with reinforced plastic, improving the fit with the hose by 30% and completely eliminating the risk of interface leakage.

In the use of TU26 equipment, old fuel filters often have problems such as "poor fuel supply" and "unstable idle speed" due to filter clogging and hose aging, leading to equipment power attenuation. After replacing this fuel filter assembly, the fuel cleanliness is increased to 98%, the carburetor clogging failure rate is reduced by 85%, and the service life of the fuel filter is extended to more than 600 hours.

Whether for continuous operation of lawnmowers or emergency operation of small generators, the TU26 Fuel Filter Assembly can deliver clean fuel to the engine with "oil resistance + fine filtration + leak prevention" performance, being the core purification component for "stable operation" of small power equipment.