Views: 0 Author: Site Editor Publish Time: 2026-06-27 Origin: Site
The Brass Three-way Cock is the "multi-path distribution core" of irrigation and piping systems, designed for convenience and sealing in water splitting. Its valve body is made of high-purity brass (99.3% copper content), resisting rust for over 1200 hours in salt spray tests—no corrosion or scale buildup even after long-term contact with water fertilizer or tap water.
The switch core is made of 304 stainless steel with a polished surface, maintaining a stable switch resistance within 5N. It still feels smooth after 10,000+ consecutive switches; the built-in nitrile rubber seal has a leakage rate of less than 0.05% under 0.8MPa high water pressure, completely avoiding water waste during splitting.
The red heat-resistant nylon handle withstands -30℃ to 120℃, no embrittlement or deformation in outdoor sun exposure or low-temperature environments. The anti-slip texture on the grip improves operation accuracy. In practical use, ordinary plastic three-ways often have "switch jamming" and "interface leakage" due to aging, while the metal structure of this brass three-way has 5x higher durability.
Whether for multi-path water splitting in garden irrigation or branch switching in home water pipes, this brass three-way cock can flexibly distribute water with "corrosion resistance + smoothness + leak prevention" performance, being a key component for efficient operation of water systems.